GERMAN TESLA TURBINE FLUGSCHEIBE

By Rob Arndt


DISCLAIMER: THE ORIGINATOR OF THIS REVEALING INFORMATION FOR PERSONAL REASONS DOES NOT WISH TO BE IDENTIFIED, SO I WILL HONOR THAT INDIVIDUAL’S REQUEST

 



Tesla Turbine Type UFO Art

 No rocket venturi but exhaust exiting through botton of hull core and ignition display around the rim, similar to how text reads

In London in 1970 or thereabouts I met an elderly woman at a meeting of the Aetherius Society to which I had a chance invitation. She claimed to be the daughter of one of the scientists who originated the German flying disk program. I talked to her for about half an hour and she showed me a book in German, with pictures that illustrated a flying disk model on the ground and in flight. We talked about the mechanics of the disk and she told me that the propulsion system was based on a Tesla turbine. This turbine she explained had a central core, to which fuel was supplied. Around the central core was a stack of thin disks and the whole was surrounded by a combustion chamber that vented underneath the craft in the same way that a rocket engine vents (with venturi etc). She further explained that the central core was spun at a very fast rate and fuel was introduced. The fuel spun outwards and exited the edge of the disks in a very fine mist. This mist was then ignited and the pressure of the explosion forced the fuel in the disk stack back towards the central core. The disk stack then accelerated. (Here I said to her that this was just like a ballet dancer pulling her leg in to spin faster, to which she replied that this was her father's exact simile). More fuel was injected and the process repeated. Thus the craft was powered by a bladeless Tesla turbine. It seems to me too that it is possible that the disk was given additional lift by a second air fan in the top of the disk that blew a constant stream of air over the top of the saucer. This alone is enough to give the disk lift and with the addition of the rocket engine its vertical acceleration would be extremely rapid. A spinning disk is perfect for re-entry into a planetary atmosphere since the heat induced friction can be dissipated over the rim of the disk, a new cool surface being presented each moment. The gyroscopic forces also present a facility for attitude control.




Site Meter





The SS Technical Branch in the 1930s and 1940s had access to Tesla concepts and technology.
The SS Haunebu which did flew in 1939 used a combination of concepts that involved German quantum physics, Thule metaphysical scientific research, possible SS non-terrestrial disc reverse-engineering discoveries… as well as Tesla’s concepts, patents, and inventions of that time period.

 

 

 



 

 


History of Tesla-designed Aircraft Patents

 

 

 




Early Tesla Flying Machine

 





Tesla-designed “electro gravitational” disc aircraft

 




Tesla Electrokinetic and Electrogravitic Air Ship